Steering

Toyota

Toyota MR2 SW20 Electric Power Steering Pump

If you're doing an engine swap, or wanting to eliminate your hydraulic power steering pump, this Toyota MR2 pump is a great choice.Still used by many in drifting and road racing, it has been proven to work very well.  Holds consistent pressure.

Touge Factory

Kswap RWD Silicone Radiator Hose Kit for TF Power Steering Kit

To make the kswap even easier for the S-chassis, we developed a reinforced silicone radiator hose kit.This version is for those of you running our hydraulic power steering kit.  The lower hose routes around the PS Pump.  This kit can be used...

Touge Factory

TF-Works RWD KSwap Lower Radiator Hose for Hydraulic PS Pump Kit

Reinforced silicone lower radiator hose for our Kswap kit.If you are running our hydraulic power steering kit, this lower radiator will route between the pump and the engine to your radiator.Includes stainless steel worm clamps.

Touge Factory

240SX S13 S14 S15 Power Steering Rack 6AN Adapter Fittings (Feed & Return)

High pressure power steeering -6an adapters are required to run 6an lines from the pump to the rack and also allows you to run a barb fitting if you choose to run a standard hose for the return. -Sold as a pair: M14 (feed) or M16 (return)

Honda

Honda KSeries Power Steering Pulley & Nut

Honda Kseries power steering pump pulley and nut.If you purchased a reman pump, chances are you didn't get one with a pulley.  You can purchase a new pulley and OEM nut.

Touge Factory

K-Swap Hydraulic Power Steering Kit - 240SX S13/S14 (LHD - USDM)

This is a bolt-on solution for those that want to use a hydraulic power steering pump with the Kswap.Our bracket is made out of 304 Stainless Steel as we have noticed flexing with aluminum brackets while drifting.Our kit incorporates an auto tensioner so...

Touge Factory

Toyota MR2 & Volvo Electric Power Steering -6AN Outlet Adapter Fitting

Toyota SW20 MR2 power steering pump and the Volvo power steering pumps are designed to work with their hard lines, and this steel fitting allows you to use a standard -6AN hose.Threads right in and seals with Earl's aluminum Stat-o-Seal.