Clutches

Clutch Masters

Clutch Masters FX300 ZF 5Spd - K Swap

FX300 - 470 FT lbs TQ K Swap ZF 5SPD Transmission    The perfect clutch for aggressive drivers that still desire smooth engagement. Our FX300 clutches utilize a segmented Kevlar disc. This will provide more holding power than FX100...

Touge Factory

K - Swap CD009 Twin Disc + Adapter Plate + Hardware

K - Swap CD009 Twin Disc + Adapter Plate + Hardware  - CD009 Twin Disc Clutch  - Billet concentric release bearing  - Adapter Plate  - All hardware included      ***Off road use only***

Clutch Masters

Clutch Masters FX250 Clutch Kit for BMW ZF 6-Speed Transmission - 300hp

The FX250 Kit is for those wanting to stay NA motor setup and staying around 300whp.Great driveability with increased torque capacity over stock.This is what we use in our K-swapped E30, and feels great for daily driving and can take a good amount of...

Clutch Masters

K20/K24 to S2000 Transmission Clutch & Flywheel - FX400

ClutchMasters FX400 clutch and flywheel for K-series to S2000 trans kit.This is billet steel flywheel with the FX400 series pressure plate with full face disk.  Recommended up to 450whp.

Clutch Masters

Clutch Masters FX350 Clutch Kit for BMW ZF 5-Speed Transmission - 375hp

The FX350 is what we'd recommend for 250whp+ NA motor used for drifting or track use.This clutch will also work for a very mild turbo setup used mostly for street.Great driveability with increased torque capacity over stock.This kit is for the ZF 5spd...

Clutch Masters

Clutch Masters FX250 Clutch Kit for BMW ZF 5-Speed Transmission - 300hp

The FX250 Kit is for those wanting to stay NA motor setup and staying under 300whp.Great driveability with increased torque capacity over stock.This is the same clutch we use in our Kswapped E30.  Great daily drivability that can take on track abuse...

ACT

ACT HD Clutch Kit for BMW ZF 6 Speed Transmission - Sprung Organic Disc

This clutch kit is required if you are running the K to BMW ZF Flywheel.Sprung organic disc setup is for 6 speed transmissions only. - We recommend the sprung organic disc with the HD pressure plate up to 400whp.  If you are planning to track the...

Touge Factory

*TF-Works Twin Disc Clutch for K Series to ZF Transmission - 6 Speed

The ACT Clutch single disc clutch started to slip on the dyno at 560whp on our K-swapped S14.Although the sprung 6-puck clutch has better street manners, we needed a clutch that can handle more.We also noticed at 8500+ RPM we had difficulty shifting.We...

Touge Factory

*TF-Works Twin Disc Clutch for K Series to ZF Transmission - 5 Speed

The ACT Clutch single disc clutch started to slip on the dyno at 560whp on our K-swapped S14.Although the sprung 6-puck clutch has better street manners, we needed a clutch that can handle more.We also noticed at 8500+ RPM we had difficulty shifting.We...

Clutch Masters

Clutch Masters FX400 Clutch Kit ZF 6Spd Transmission - 6 Puck / 550hp

Clutch Masters FX400 Clutch kit for the 6 Speed ZF Transmission.You must use the throw out bearing included with the K to ZF Trans billet flywheel.This clutch should be for power goals up to 550whp with our swap kit.If you are near this power level and...

Clutch Masters

Clutch Masters FX400 Clutch Kit ZF 5Spd Transmission - 550hp

Clutch Masters FX400 Clutch kit for the 5 Speed ZF Transmission.You must use the throw out bearing included with the K to ZF Trans billet flywheel.This clutch should be for power goals up to 550whp with our swap kit.For hard track use with occasional...

ACT

ACT HD Clutch Kit for BMW ZF Transmission - 6 Puck Sprung

This clutch kit is required if you are running the K to BMW ZF Flywheel. - We recommend the 6-puck sprung disc with HD pressure plate for power goals up to 525whp.    6 Puck Disc Description ACT Heavy Duty pressure plates use exclusive...