Steering

Gk Tech 240SX/SKYLINE/Z32 REAR KNUCKLES WITH ALL NEW KINEMATICS

DESCRIPTION After nearly 2 years in development, countless prototypes and revisions we have a lightweight yet strong drop knuckle for the S/R/Z32 chassis Nissan's. They come with dual caliper brackets as standard, high-quality PTFE lined spherical...

GKTech

GKTECH - 350Z/G35 Front Super Lock Lower Control Arms

The GKTECH Super Lock front lower control arms simplify, improve and replace the front lower control arm and compression rods on the 350z/G35, while also supporting around 65+ degrees of steering lock.These arms are designed based off CMM data, they...

GKTech

GKTECH - HIGH MISALIGNMENT 350Z/G35 TIE ROD ENDS

The GKTECH high misalignment tie rods have 64 degrees of misalignment and also up to 25mm of bump steer correction built in. Although these may look pretty similar to other tie rod ends on the market, don't be fooled as they are different (in a good...

GKTech

GKTECH - 350Z/G35 Solid Aluminum Steering Rack Bushings

The GKTECH Solid Aluminium Steering Rack Bushings are a direct replacement of the OEM rubber bushings.The OEM rubber bushings are prone to high loads, especially on a track/ drift car.Our aluminium bushes leave no margin for play and are CNC machined...

ISR

ISR Performance - Inner Tie Rods - Nissan 350z

ISR Performance  Inner Tie Rods - Nissan 350z Inner tie rods wear and can lead to vague steering feel and increased tire wear, replace your worn factory inner tie rods with our new OE style replacement inners. What's in the box: 2x Inner...

GKTech

GKTECH - 350Z/G35 Steering Angle Kit W/ Bolt On Rack Spacer

The GKTECH Z33 350z/Infiniti G35 angle kit is a simple, lightweight, yet super effective bolt on steering kit.It is a bolt on kit, meaning it can be fitted and removed with no modifications.With 30% faster steering and a height adjustable rod end for...

Circuit Sports - 350Z Inner Tie Rod

Hard inner tie rods set for the Nissan Z33 350Z chassis are constructed much stronger than the OEM pieces that have a tendency to bend and break during hard cornering or drifting. The inner tie rods help allow increased steering angle to achieve the...

WiseFab - Front Lock Kit - Nissan 350Z

WiseFab - Front Lock Kit - Nissan 350Z 65 degrees of lock, parallel steering.You could tune your steering geometry either towards positive or negative Ackermann in just a few minutes even at trackside without messing up an alignment...

SPL Parts

SPL V5 Front Bumpsteer Adjustable Outer Tie Rod Ends 350Z/Z32/R32/R33/R34

Our SPL Front Tie Rod Ends (TRE) allow the tie rod end pivot to be relocated, which will correct bump steer resulting from modified caster or lower arm geometry, thus reducing lap times.Precision CNC machined 9310 Alloy shanks with 190ksi...

Megan Racing

Megan Racing Inner Tie Rods Nissan 350Z G35 Coupe

- Constructed of Heat-Treated Steel Alloy for increased strength over OEM. - Built-In Spacer to allow as much angle as possible without steering lock. - Can be utilized with OEM or aftermarket Tie-Rod ends that use OEM Threads.

Megan Racing

Megan Racing Outer Tie Rods Nissan 350Z Infiniti G35 Coupe

- Constructed of Heat-Treated Steel Alloy for increased strength over OEM. - Spacers allow the tuning of Bump-Steer for proper suspension geometry. - Can be utilized with OEM or aftermarket Tie-Rods that use OEM Threads.