K-Swap Hydraulic Power Steering Kit - 240SX S13/S14 (LHD - USDM)

K-Swap Hydraulic Power Steering Kit - 240SX S13/S14 (LHD - USDM)

(No reviews yet) Write a Review
Calculated at Checkout


This is a bolt-on solution for those that want to use a hydraulic power steering pump with the Kswap.
Our bracket is made out of 304 Stainless Steel as we have noticed flexing with aluminum brackets while drifting.
Our kit incorporates an auto tensioner so there is no need to adjust using a manual tensioner or shims.  
Using as much Honda OEM genuine parts as possible we have developed a kit that has gone through thousands of miles of testing and track abuse.
With this kit, power steering feels very similar to stock.
Currently, this kit is only available for the S13/S14 LHD/USDM models.  This will fit the RHD, however you will have to make your own lines from the pump to the rack.

When you purchase your engine, many times the power steering pump is already stripped off of the engine.
You can source a genuine Honda pump or reman pumps.  
We include EARL'S High pressure power steering line for the pump to the rack, but not the feed line due to variations of mounting locations of the reservoir.

If you purchased a power steering pump and need the pulley and nut, Please GO HERE.

If you do not already have rack fittings installed, you can purchase them HERE.

Reinforced silicone lower radiator hose for the Power steering kit.  The lower radiator hose is routed to avoid the pump and connect to our Kswap Koyo Radiator. CLICK HERE for the Lower Radiator Hose