OEM Parts

NGK

NGK BKR7EIX Iridium Spark Plugs (4-Pack) - Honda K20 / K24

Stock heat range Iridium spark plugs for K-series engines. The improved throttle response, superior anti-fouling and high-ignitability makes Iridium IX® ideal for the performance enthusiast. Iridium’s extremely high melting point is...

Honda

Honda OEM Power Steering Pulley Nut

Genuine Honda OEM Power Steering Nut M12x1.25

Honda

K20/K24 OEM Valve Cover Gasket and Spark Plug Tube Seals

Genuine OEM Honda valve cover gasket and tube seals for K-Series engines.

Honda

K-Series K20/K24 USDM Water Pump Passage Housing

Genuine OEM Honda K20/K24 USDM Water pump passage housing.If you purchased a JDM K24A2, you may have noticed that the alternator is attached differently then the USDM K-series engines. You may also have found it to be very difficult to find a...

Honda

Honda K-Series Rear Main Seal

K-Series rear main seal.Always a good idea to replace these when the trans is off.

Honda

Honda K-Series Vtec Solenoid Filter Screen

OEM Honda VTEC Solenoid Gasket For K-Series Engines

Honda

Honda KSeries Upper Coolant Neck Adapter Gasket

OEM Honda gasket for the billet water neck adapter.

Honda

RWD Kswap Complete Idler Pulley Kit with Bracket and Belt

OEM Honda Idler pulley kit with belt for RWD K-swapGenuine Honda OEM Bracket, Bolt, Pulley, and Bearing Cover.Please measure what length belt you need as there are different size crank pulleys offered on the K24.For reference:Part...

Honda

Honda K-Series Crankshaft Position Sensor O-ring - K20 / K24

Another one of those small seals that should be changed while the front cover is off.

Honda

Honda RSX / S2000 Oil Pump Chain Kseries K20 / K24

You have to remove the pan and upgrade your oil pump, and if you upgrade to the RSX Type S oil pump, you will need this chain.The RSX oil pump has proven to supply the K24 with stable pressures even at the higher horsepower levels.

Honda

Honda OEM K20/K24 K-Series Front Main Seal

More then likely your engine will be out and on an engine stand.Perfect time to replace all of the important seals and gaskets.  Front main and rear main is a must!Use only genuine Honda!

Honda

Chain Case O-Ring - K24

Genuine OEM replacement O-ring for the front cover chain case.If you're refreshing the motor, and changing all of the seals and gaskets don't forget this one.