Categories

Radium Engineering - Swivel Press-In Fittings - Nissan Valve Covers

Radium Engineering - Swivel Press-In Fittings - Nissan Valve Covers

kn431,94
(No reviews yet) Write a Review
Shipping:
Calculated at Checkout

Description

Click here to download installation instructions (PDF)

Radium Engineering low profile swivel fittings simply press-in. No drilling or welding required. Nissan KA24DE shown below.


Nissan S14/S15 SR20DET shown below.


FEATURES
-Stainless/Aluminum Construction
-Anodized and Laser Engraved
-Swivel Action with Viton O-Rings
-Simple Press-Fit Installation

20-0810
This low profile 10AN fitting is a direct replacement for the valve cover barb found on the intake side of the Nissan KA24DE S13/S14 valve cover.

This fitting has a slight angle on the flange in an attempt to match the casting draft angle on the KA24DE valve cover. It is normal for there to be a slight gap after installing.

When installing into the valve cover, the flat spot (shown in blue) should be facing upwards.

20-0809
This low profile 12AN fitting is a direct replacement for Nissan RB26DETT valve cover fittings.

NOTE: There is one on the intake valve cover and one on the exhaust valve cover.

If replacing both OEM fittings, quantity 2 must be purchased.


20-0811
This low profile double ended 10AN banjo fitting is a direct replacement for the valve cover barbs found on the exhaust side of the Nissan SR20DET S13 valve cover.

This press-in is shown below using OEM hoses simply with two 14-0211 PushLok 10AN Hose Ends


20-0812
This low profile 10AN banjo fitting is a direct replacement for the valve cover barb found on the exhaust side of the Nissan SR20DET S14/S15 valve cover.



20-0808
This low profile 10AN fitting is a direct replacement for the PCV valve on the intake side of the valve cover for the following:
Nissan Skyline RB25DET
Nissan Skyline RB25DET NEO
Nissan Silvia SR20DET (S14 and S15 Only)
Nissan Silvia Primera SR20DE (S14, S15, P11 Only)
Nissan Bluebird Primera Wingroad SR20VE
Nissan X-Trail SR20VET
Nisssan GT-R VR38DETT (07-08 Only)

NOTE: 20-0808 will work in many Nissan/Infiniti models, some are listed below. If the PCV valve is mounted with rubber grommet P/N: 11812-41B00 (shown below), than Radium P/N: 20-0808 will work.

Below is a list of other compatible Nissan engines:

CG10DE
CG13DE
CGA3DE
CR12DE
CR14DE
GA15DE
GA16DE
HR12DDR
HR12DE
HR15DE
HR16DE
KA24DE (99-01 Bassara Only)
QG13DE
QG15DE
QG18DD
QG18DE
RB20DE
RB25DE
RB25DET
SR16VE
SR18DE
SR20DE (S14, S15, P11, N30 Only)
SR20DET (S14 and S15 Only)
SR20VE
SR20VET
TB48DE
VQ20DE
VQ30DE
VQ30DET
VR38DETT (07-08 Only, Mounted to Separator)