Description
A high-lift camshaft with proven performance in complete engines is now available as a standalone
product.
It is optimally matched for use with the V CAM SYSTEM STEP Pro.
With a 280° duration and 10.2 mm valve lift, it delivers a smooth, free-revving feel with strong pull all the
way to high RPM.
The allowable engine speed is approximately 10,000 rpm when used with HKS reinforced valve springs
(STEP2).
Use in combination with the RB26 V CAM SYSTEM STEP Pro (22007-AN022) is recommended.
【Caution】
➢ Failure to observe the following precautions may result in engine damage.
① Use in combination with the HKS STEP2 reinforced valve springs (22001-AN001) is required.
② Cylinder head machining is required to avoid interference with the cam lobes.
③ Set the allowable engine speed to the lower limit specified for the combination with the intake camshaft.
