GKTech Super Lock Front Lower Control Arms - S13 / S14 / S15 / Z32 / R32

GKTech Super Lock Front Lower Control Arms - S13 / S14 / S15 / Z32 / R32

(No reviews yet) Write a Review
Free Shipping


Product Description

The new GKTECH Super Lock front lower arms are a drifters wet dream but are equally as impressive for our grip friends with 35mm of length adjustment. For drifters (aka skid racers) these lower arms will support 70 degrees of steering lock lead wheel and 65 degrees trailing wheel. They may look similar to others currently sold by other companies but are in fact unlike any other lower arms on the market. These are the first commercially available 1 piece lower arms that work with OEM and OEM style front knuckles (such as the drop knuckles that we sell). 

These lower arms are based off CMM data, are CAD designed, FEA tested, have CNC machined ends and the main body is CNC Machined chromoly steel for maximum strength. To finish the arms off they're E-coated (aka electrophoresis coating) for rust prevention and we're exclusively using Teflon lined bearings including a large 3/4" outer high misalignment bearing, all with dust covers for increased longevity.

Length Options:
S13/R32 +9mm > +44mm 
S13/R32 +39mm > +74mm
S14/S15/R33/R34 0 > +35mm
S14/S15/R33/R34 +30mm > +65mm

- Feature 5/8" Teflon lined sphericals (inner) and high mis-alignment 3/4 sphericals (outer) which eliminates the flex found in factory rubber bushing offering a more direct and predictable feel.
- Our V2 lower arm main body is CNC machined from a billet chromoly block with CNC machined ends.
- CMM measured, CAD designed, FEA tested and CNC machined.
- Choose between 2 different ball joint shank lengths; standard or +20mm to help with roll center correction (NOTE: RC is only corrected on S-chassis', do not buy the +20mm shanks for use on Skylines)
- Choose from either S13/R32 tapered shank or S14/S15/R33/R34 tapered shank at the time of ordering 

Vehicle Compatibility:
- Nissan 180sx
- Nissan 240sx
- Nissan S13 Silvia
- Nissan S14 200SX
- Nissan S15 200SX
- Nissan Skyline R32 GTS-T 
- Nissan Skyline R33 GTS-T
- Nissan Skyline R34 GTT
- Nissan C33
- Nissan C34
- Nissan C35
- Nissan A31 Cefiro
- Nissan Z32 300zx

Installation notes:
- Can be used with all OEM style front knuckles or cut and shut knuckles.
- +20mm extended shank is not recommended for rims smaller than 18" in diameter. 

Shank Options
S13 standard length
S13 +20mm 
S14/S15 standard length 
S14/S15 +20mm