Categories

Radium Engineering Dual Catch Can Kit - 00-05 Honda S2000 Fluid Lock

Radium Engineering Dual Catch Can Kit - 00-05 Honda S2000 Fluid Lock

kr4.526,57 kr4.764,83
(You save kr238,27)
(No reviews yet) Write a Review
SKU:
20-0096-FL
Shipping:
Calculated at Checkout

Description

Radium Engineering Dual Catch Can Kit - 00-05 Honda S2000

An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow by accumulated from aggressive driving. Excess oil saturated air circulating back into the air intake stream can lead to degraded performance. Unlike many catch cans on the market, this catch can features an integrated oil separator that accelerates oil condensation. This cleans the PCV gasses and reduces the oil build-up on the inside of the intake tract and intake manifold. The stainless steel filtration media is cleanable and reuseable.

For the ultimate in engine protection, Radium recommends the S2000 Dual catch can kit. This Dual catch can kit utilizes both the "crankcase vent" catch can and "PCV" catch can. The "crankcase vent" catch can kit runs inline with the 1/2" valve cover breather port. At low loads it experiences atmospheric pressure, but when the engine is at high load (WOT), this hose will experience vacuum and would normally be drawing unwanted crankcase vapors, unspent fuel, and oil sludge into the air filter intake pipe. If the engine is turbocharged or supercharged and you are finding oil accumulation stuck in the intercooler, this catch can is a necessity as oil will lower the thermal efficiency properties of the heat exchange process. The "PCV" catch can kit runs inline with the 3/8" PCV (positive crankcase ventilation) valve. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV "check" valve closes and, thus, this hose experiences no flow. Conversely, the PCV hose will experience "metered" vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run.

Features:

  • Effectively raises the octane and increased engine performance from cleaner inlet air
  • Prevents oil buildup in the intake or intercooler system walls, throttle body, intake manifold, etc.
  • Excessive oil collection can be an indicator of a damaged engine.
  • Lowers hydrocarbon emissions
  • Capacity: 6 fluid ounces
  • Height (without fittings): 5 inches
  • Outside Diameter: 2.45
  • Radium billet oil catch can with integrated condenser and dipstick
  • Radium laser cut powder coated S2000 specific mounting bracket
  • Anodized aluminum -8AN hose ends and adapter fittings
  • Enough 1/2" PCV rubber hose to mate to custom applications
  • Vacuum and heater hose to eliminate OEM metal hard tube loom
  • Stainless steel mounting hardware