Description
MaxxECU GEN2 SPORT with LSU 5.2 Wideband, Flying Lead Install Kit
Everything you need to wire up a GEN2 SPORT, including the wideband sensor and harness.
This kit pairs the MaxxECU GEN2 SPORT with a Bosch LSU 5.2 wideband sensor, the connector, and an open-ended (flying lead) harness for a custom install.
The GEN2 SPORT runs on the proven GEN2 platform and is tuned with MaxxECU’s easy-to-use MTune software. The MAP sensor, wideband controller, knock inputs and data logging are all built in, so you skip a lot of extra boxes and wiring.
Why You’ll Want It
- Sequential control of up to 6 cylinders (12 cylinders in wasted spark)
- Built-in 550 kPa MAP sensor supports up to 4.5 bar / 65 PSI of boost
- Built-in wideband controller with a Bosch LSU 5.2 sensor included
- Dual knock sensor inputs for engine protection
- 4 GB onboard logging, over 2000 channels at up to 1000 Hz
- Wi-Fi, Bluetooth and USB-C for wireless tuning and fast PC connection
- IP68-rated aluminium enclosure, sealed against water and dust
What’s Included
- MaxxECU GEN2 SPORT ECU
- GEN2 SPORT cable harness 1 and cable harness 2 (flying lead)
- Bosch LSU 5.2 wideband lambda sensor (0258 037 010)
- 6-way socket housing connector for the LSU wideband sensor
- MAP sensor fittings: BSP 1/8 to AN3 nipple and BSP 1/8 to hose nipple
- USB-C communication cables (USB-C to USB-A and USB-C to USB-C)
- Bluetooth / Wi-Fi antenna
- 2 USB-C rubber covers
- Protective foam and box
- Printed quick guide and wiring diagram
- 2 MaxxECU stickers
Inputs & Outputs
- 4 pulse inputs (VR/Hall) with selectable pull-ups
- 12 analog inputs with selectable pull-ups
- 6 injector outputs (high/low impedance, peak and hold)
- 6 ignition/GP outputs (selectable 5V/12V/GND)
- 7 general-purpose ground outputs
- 2 H-bridge outputs with E-Throttle support
- CAN bus for vehicle communication, expansion and transmission control
Connectivity & Software
- Wi-Fi communication with MTune
- Bluetooth connectivity with MDash
- High-speed USB-C (480 Mbit/s) for PC communication
- Additional USB-C (12 Mbit/s) for tablet communication and charging
- MTune PC software for configuration, tuning and logging
- Built-in 3-axis accelerometer (up to 8G)
