Description
This valve can be used as a brake shut-off. When energized, the valve will block pressure from reaching downstream. The valve does not prevent fluid from returning to the master cylinder. This eliminates the possibility of trapping pressure when activating the valve. Requires a 12 Volt, 5 amp (recommended) fused power source through a toggle switch. Warning: Not a line lock assembly. Not for street use. Please read instruction sheet available at http://www.wilwood.com/pdf/ds572.pdf before attempting installation
Inlet size: 1/8-27 NPT
Inlet Fit: 3/8-24 IF Female
Outlet size: 1/8-27 NPT
Outlet Fit: 3/8-24 IF Femaile
