Categories

SuperPro - Front Steering Rack Bushings - IS300 / JZX90 / JZX100

SuperPro - Front Steering Rack Bushings - IS300 / JZX90 / JZX100

â‚©82,599
(No reviews yet) Write a Review
SKU:
SPF2699K
Shipping:
Calculated at Checkout

Description

Rack and Pinion Bushings from SuperPro

If you're steering column is producing some "clunking" or popping sounds, your steering wheel is loose or jerky, especially over bumps, then you may have worn out bushings in your rack and pinion setup. To fix these steering problems, or just sharpen up your current steering response, Superpro's Rack and Pinion Bushings can replace that worn out rubber and hold your steering components more securely.

 
rack and pinion steering diagram

Worn Bushings can Affect Steering

Your rack and pinion is basically a gear that connects your steering wheel and tires. Since gears are designed to fit together precisely, if the bushings mounting those parts to the frame are loose then you can develop loose steering or 'bump steer'. Rubber bushings will begin to wear down over time plus other factors like exposure to engine oil or heat from the engine will break down the integrity of rubber bushings, compromising their ability to hold your steering rack in place.

* If there is any play in the u-joint connecting the steering coupler and the pinion, you can have similar symptoms to worn out rack and pinion bushings. If you do find some looseness, we offer Moog replacement u-joints to restore that steering wheel to rack connection.

Polyurethane Vs. Rubber

SuperPro manufactures their rack and pinion bushings with polyurethane, giving you a much stronger, longer lasting mount that will still absorb some of the vibration from the road to the steering wheel. Polyurethane doesn't flex like rubber, is much more resistant to heat, and is unaffected by oil, so it's lifespan is much longer. Polyurethane does allow more vibration from the road, but SuperPro's lifetime warranty, which includes 4x4 applications, means you don't have to worry about replacing these bushings again.

 
 

The SuperPro Difference

If you want to buy from a suspension component manufacturer with serious chops then SuperPro is a great brand to consider. With an emphasis on extensive research, SuperPro develops their parts from the ground up so you're not just getting a Polyurethane copy of a rubber OE component, but an application specific part. Based in Australia, they've been manufacturing suspension bushings since 1983 and they've tested their parts on some of the harshest terrain in the world.

So if you're looking for a solution to loose, noisy steering or want more response from your steering wheel then SuperPro rack and pinion bushings can replace those OE rubber components and will stick around for the life of your vehicle.



Will fit: IS300 / JZX90 Mark2, Chaser, Cresta / JZX100 Mark2, Chaser, Cresta