Description
OEM Honda gasket for the billet water neck adapter.
OEM Honda gasket for the billet water neck adapter.
Quick view
Touge Factory
The upper coolant neck sits between the rear of the engine and the firewall.This billet water neck is for the RBB / RBC (OEM K24 head) RWD K-swap setups, and our outlet tube aims forward towards the...
Quick view
TracTuff
If you are using the PRB cylinder head off of the K20 engine, this will allow you to route the upper radiator hose easily towards the front of the car.Allows for a clean easy setup, and not having to...
Quick view
Touge Factory
The newest version of the billet K series water neck flange for the K24A, K24A2, K24A4, K24A8, and K20Z3 engines/ cylinder heads. If you are running a swirl pot or just want have AN connection...
Quick view
Touge Factory
The upper coolant neck sits between the rear of the engine and the firewall.This billet water neck is for the RBB / RBC (OEM K24 head) RWD K-swap setups, and our outlet tube aims forward towards the...
Quick view
Chase Bays
A major unsolved problem for the Toyota 1JZ-GTE | 2JZ-GTE engines is the upper water neck. Especially in swaps. It's bulky, it's difficult to fabricate on, and it just doesn't make sense for most...