Flanges, Fittings & Parts

ATP

2 Bolt Inlet Adapter Flange for GT25/28/28RS Turbos

PRODUCT DESCRIPTION: CNC machined aluminum compressor inlet flange for GT25/28/28RS compressor housings with 2 bolt inlet flange. Fits any Garrett GT28, GTX28, GTX29, GT30, or GTX30 series turbocharger with alternate compact 2 bolt inlet GT28R style...

ATP

Turbo Oil Feed Stainless Steel Line (-4AN)

PRODUCT DESCRIPTION: -4AN stainless steel (high pressure) braided line. Three feet in length and includes pre-crimped -4AN swivel hose ends (1x 90 degree fitting and 1x straight fitting). NOTE: Two straight hose end fittings are available as an...

-4 size Oil Inlet Fitting with Built-In .035 Restrictor for Garrett Ball Bearing Turbos

Product Description: -4 (-4AN) Size oil inlet restrictor fitting (0.035" orifice / hole size) for Garrett GT and GTX Ball Bearing Turbochargers. Output is -4AN male flare. High durability and reusable Stainless Steel material.   Use...

Touge Factory

Turbo Inlet / Outlet Flange Lock Nut + Nord Lock Washer M8x1.25

Set of 4 lock nuts and Nord lock style washers will help reduce the nut and stud from backing out of the manifold.

ARP

ARP - Turbo to Manifold Stud Kit M8x1.25

M8 X 1.25 X 38mm, broached, 4 piecesKit #: 400-8002 Specifications Socket Size(s) 10mm 12pt, 3mm Allen   Great replacement for rusted or worn out turbo to manifold studs. Will work with any turbo manifold using 8x1.25 thread pitch.

GKTech

GKTECH - SR20DET T28 Turbo Clocking Adapter Plates

The GKTECH aluminium turbo adapters allow the use of the standard S13/240sx SR20 turbo snout/intake and hot pipe snout with any GT28 turbo. This makes installing a T28 on a redtop SR20 a piece of cake and saves the headache of having to get...

Garrett

Garrett Turbo Aluminum Oil Drain Flange for GTX, GT Turbos

Product Description: Billet aluminum oil drain flange (oil return flange) for Garrett GT ball bearing series, Garrett GTX ball bearing series (specific model compatibility below) and T25 / T28 Non-ball bearing turbochargers. Threaded for a 1/2...

Garrett

Garrett - Turbo Coolant Line - SR20DET T28 & T25/GT/GTX SERIES

Steel braided in/out coolant line assembly for the Nissan SR20DET. Used for the GT (BB T28)/GTX top or bottom mounted turbo. Includes fittings.

Garrett

SR20DET Top Mount Oil Feed Line with Restrictor for Garrett BB GT / GTX Turbo

Oil feed line assembly w/ restrictor for the Nissan SR20DET. For a GT (BB T28)/GTX top or bottom mounted Turbo.

ISR

ISR Performance Titanium Turbo Blanket - T25/T28

ISR Performance Titanium Turbo Blanket - T25/T28 Titanium Construction Comes With all Hardware Protects Against Heat Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets...

ISR

ISR Performance Top Mount Turbo Lines - SR20DET S14 Motor

ISR Performance Top Mount Turbo Lines - SR20DET S14 Motor SIS steel braided turbo lines are direct replacement of factory turbo hardlines found in the S13, S14, S15, SR20DET (T25/T28) turbos. It utilizes high quality aircraft fittings, and it comes...

Tomei

Tomei KA24DE Turbocharger Hardware Kit

Tomei KA24DE Turbocharger Hardware Kit (TB401A-NS16PK) Hardware pack for turbocharging your KA24DE!