ATP

ATP

Cast Aluminum Rear Exit Intercooler End Tank 12" x 3" with 3.0" Outlet - Bottom Right

Rear exit end tank. Cast aluminum. 12" tall x 3" thick with 3" hose connection. Bottom right inlet/outlet location. Application Notes- Standard intercooler core requires purchasing 2 cast end tank...

ATP

Cast Aluminum Rear Exit Intercooler End Tank 12" x 3" with 3.0" Outlet - Bottom Left

Rear exit end tank. Cast aluminum. 12" tall x 3" thick with 3" hose connection. Bottom left inlet/outlet location. Application Notes- Standard intercooler core requires purchasing 2 cast end tank...

ATP

Cast Aluminum Intercooler End Tank 12" x 3.5" with 3.0" Outlet

Cast aluminum Intercooler End Tank. 12" tall x 3.5" thick with NEW 3" hose outlet (or inlet if you're using one this same tank on both sides of the intercooler assembly). Nice contoured casting, used...

ATP

Cast Aluminum Intercooler End Tank 10.5" x 3" with 2.5" Outlet

Cast Aluminum Intercooler End Tank. 10.5" tall x 3" thick with 2.5" outlet (or inlet). Works great with any Garrett (or other) 10.5" (tall) x 3" (thick) cores or Koyo 2.5" thick core. Can fit down to...

ATP

Cast Aluminum Intercooler End Tank 12" x 3.5"

Product DescriptionCast end tank, blanked for customer welded application. 12" tall x 3.5" thick for use with any intercooler core with a 12" tall by 3.5" deep entry or exit. High quality USA made...

ATP

Cast Aluminum Intercooler End Tank 12" x 4"

Product DescriptionCast end tank, blanked for customer welded application. 12" tall x 4" thick for use with any intercooler core with a 12" tall by 4" deep entry or exit. High quality USA made...

ATP

Cast Aluminum Intercooler End Tank 12" x 3"

Product DescriptionCast end tank, blanked for customer welded application. 12" tall x 3" thick for use with any intercooler core with a 12" tall by 3" deep entry or exit. High quality USA made...

ATP

2 Bolt Inlet Adapter Flange for GT25/28/28RS Turbos

PRODUCT DESCRIPTION: CNC machined aluminum compressor inlet flange for GT25/28/28RS compressor housings with 2 bolt inlet flange. Fits any Garrett GT28, GTX28, GTX29, GT30, or GTX30 series...

ATP

Low Profile Banjo -3AN Turbo Oil Feed Stainless Steel Line Kit (48") with Restrictor

PRODUCT DESCRIPTION: Low profile oil inlet (oil feed) -3AN LINE Kit for GT25R through GT35R (or GTX28 through GTX35) series turbochargers. 48" line length with integrated banjo. Includes...

ATP

Turbo Oil Feed Stainless Steel Line (-4AN)

PRODUCT DESCRIPTION: -4AN stainless steel (high pressure) braided line. Three feet in length and includes pre-crimped -4AN swivel hose ends (1x 90 degree fitting and 1x straight fitting). NOTE:...

ATP

ATP - Wastegate Bracket T04B

Wastegate bracket. Fits T04B frame compressor housings that are standard on GT28/GTX28 and most actuators with the universal 2 bolt bolt spacing. Garrett universal.

ATP

ATP - Wastegate Actuator - ALL GT/GTX Turbos

ATP - Wastegate Actuator - ALL GT/GTX Turbos