Description
The programming tool required to flash the MaxxECU 8HP (GEN1) CAN control support.
Transmission must be flashed in order to work with the MaxxECU.
The programming tool required to flash the MaxxECU 8HP (GEN1) CAN control support.
Transmission must be flashed in order to work with the MaxxECU.
Quick view
MaxxECU
This is for the Flash tool rental for 8HPxx transmissions to unlock the TCU.Flash tool rental: $165 + $40 shipping. This includes a return label.Rental will require a $350 deposit, which...
Quick view
MaxxECU
This is the harness we used for our E90/E91/E92 LSx swap.MaxxECU makes your LSx swap simple especially if you are using a 8HP trans like us.
Quick view
X4 Ford Quick Overview The X4 Power Flash arrives Pre-Loaded with DYNO Proven tune files that INCREASE HORSEPOWER and TORQUE! Programming your vehicle with one of SCT's pre-loaded tune files...
Quick view
Turbolamik
TurboLamik TCU 2.0 is an advanced transmission controller for the extremely popular and durable ZF 8HP transmissions.It allows you to control the gearbox in 8 modes varying from gentle automatic to...
Quick view
Turbolamik
TCU WIRING HARNESS by TurboLamik CAN - used for communication with the engine ECU over CAN BUS