LINK ECU

LINK

link ecu - GTRLink - NGTRX Bundle

DETIALS The perfect package to upgrade your Nissan GTR. The G4X NGTRX ECU is a direct replacement for your factory ECU. Combined with the XS Loom, CANJST4 and CAN LAMBDA this is a simple and cost-effective solution for improving the performance and...

LINK

LINK ECU G5 ECU Plug-In - Toyota GT86/Subaru BRZ/Scion FR-S - LHD

The GT86 G5 Plug-in is a standalone plug and play replacement for the factory ECU and plugs straight into the original wiring loom, no adapter harness needed and comes with a sample map for a tuning head start. The GT86 G5 Plug-in runs the same powerful...

LINK

Link ECU - G5 Voodoo Neo 6

  The G5 Voodoo Neo 6 can run :   6 cylinders with staged sequential injection, dual high pressure fuel pumps and direct spark, or an 8 cylinder as sequential only with DI* or Port, and direct spark.   Highlights...

LINK

Link ECU - G5 Voodoo Neo 4

The G5 Voodoo Neo 4 can run: 4 cylinders with staged sequential injection, a single high pressure fuel pump and direct spark, or a 6 cylinder as sequential only with DI* or Port, and direct spark. Highlights for both versions ( Neo...

LINK

LINK ECU TCC08 8 Channel EGT to CAN Module

Link TCC08 8 Channel EGT to CAN module, powered by CAN checkedThe TCC08 EGT to CAN module allows you to connect up to eight Type-K thermocouples and send the values ​​via CAN bus and/or monitor them directly on your wireless enabled device...

LINK

LINK MIPS 150PSI Pressure Sensor 1/8 NPT

Media Isolated 150PSI/10 Bar Pressure Sensor, 1/8 NPT The MIPS 150PSI/10 Bar Pressure Sensor features a durable stainless steel construction and is designed for compatibility with various fluids, including oil, petrol, and water. Features:•...

LINK

LINK ECU TCC04 4 Channel EGT to CAN Module

Link TCC04 4 Channel EGT to CAN module, powered by CAN checked  The TCC04 EGT to CAN module allows you to connect up to four Type-K thermocouples and send the values via CAN bus and/or monitor them directly on your wireless enabled device...

Rywire

RyWire Harness Link ECU

The Rywire K-Series LINK G4 engine harness is a universal, fully populated race loom that incorporates all the essential functionality of the fastest Front wheel drive Hondas of today!   If you are building a Front (or all) wheel drive race car...

LINK

LINK ECU DI Driver-4

  LINK ECU DI Driver-4 (144-5000) Discover the next evolution in engine tuning with our advanced Direct Injection (DI) control module. The DI Driver-4 is a highly configurable, cost effective and integrated solution, designed to give you full...

LINK

LINK ECU G5 ECU Plug-In - GT86/BRZ/FR-S - RHD

LINK ECU G5 ECU Plug-In - GT86/BRZ/FR-S (241-4000): The GT86 G5 Plug-in is a standalone plug and play replacement for the factory ECU and plugs straight into the original wiring loom, no adapter harness needed and comes with a sample map for a tuning...

LINK

LINK ECU CANJST - CAN Connection Cable for Plugin ECU's (5pin)

Used to add CAN communications to G4+/G4X Plugin ECU’s which have a 5 Pin CAN connector.  Plugs directly into the CAN socket on the ECU PCB. 12V and Ground via flying lead. Terminates to a DTM4 Male Connector which is compatible with other...

LINK

LINK ECU EX Expansion Loom (XSL)

Want to add additional inputs/output to your Link Plugin ECU? Use the XS Loom. The Link XS Loom plugs into the expansion connector on all Link G4, G4+ and G4X plug-in ECUs. The number of extra inputs and outputs added by the XS Loom is dependent on the...