Steering

Touge Factory

Extended Outer Tie Rods V.2 with Aurora Bearing + Inner Tie Rods - Nissan 240SX S14 & S13

Extended outer tie rods are longer then stock by 1.5"  Recommended to be used with modified and/or shortened knuckles with increased steering angle. Our outer tie rods will correct and reduce bumpsteer on lowered cars due to lower arm geometry...

Touge Factory

TF Outer Tie Rod Replacement Shanks

Replacement Shanks for TF Tie Rods. Torque spec is 55-60 ft lbs.  Sold individually. Includes x1 Large Spacer, and x2 Small Spacers. 

Touge Factory

TF 240SX S13/S14 Inner and Outer Tie Rod Set (Circuit Sport) - Version 2 with Aurora Bearings

New Version 2! Our outer tie rods will correct and reduce bumpsteer on lowered cars due to lower arm geometry.The outer tie rod design with the taller shank relocates the pivot point, which also reduces binding and leading to premature failure.The...

Touge Factory

TF Extended Outer Tie Rods V.2 with Aurora Bearing - Nissan 240SX S14 & S13

Extended outer tie rods are longer then stock by 1.5"  Recommended to be used with modified and/or shortened knuckles with increased steering angle. Our outer tie rods will correct and reduce bumpsteer on lowered cars due to lower arm geometry...

Touge Factory

TF Outer Tie Rods V.2 w/ Aurora Bearing Rod End - Nissan 240SX S14 & S13

New Version 2! Our outer tie rods will correct and reduce bumpsteer on lowered cars due to lower arm geometry.The outer tie rod design with the taller shank relocates the pivot point, which also reduces binding and leading to premature failure. The...