The factory sway bar endlink on the 240sx is not suitable for aftermarket sway bars.
The factory end link will bend and distort when used with larger sway bars.
Also, these adjustable end links will allow you to set the preload on the sway bar.
Quick view
Circuit Sports
Circuit Sports polyurethane rear sway bar end links for all 1989-98 Nissan 240SX. This is OEM replacement that will work for all types of aftermarket replacement sway bars.
Quick view
GKTech
GKtech 240sx/R32 Skyline Front Swaybar End Links The GKTECH Front Swaybar end links are a direct replacement of the OEM end link but with Polyurethane bushings rather than the OEM (typically...
Quick view
Whiteline
The factory sway bar endlink on the STI is not suitable for aftermarket sway bars.The factory end link will bend and distort when used with larger sway bars. Also, these adjustable end links...
Quick view
Touge Factory
This is for S13 with SR or KA Manual Trans. Most 240sx have the center driveshaft carrier bearing shot and will move under load.This will cause vibration and knocking noise. 3" Aluminum...
Quick view
Touge Factory
Our high capacity Kswap oil pan may interfere with certain aftermarket swaybars or if your car is very low.If you are running a front sway bar, please check to make sure you have clearance.We...
