Categories

TF-Works Oil Catch Can Kit with Lines and Radium Fittings - S14/S15 SR20DET

TF-Works Oil Catch Can Kit with Lines and Radium Fittings - S14/S15 SR20DET

Â¥69,385
(No reviews yet) Write a Review
SKU:
TFOCCS14
Shipping:
Calculated at Checkout

Description

Complete catch can kit with Radium press-in fittings and AN lines for your S14.
This will also work for those with a S13.4 hybrid valve cover in your S13.

The purpose of an oil catch can is to catch the rerouted oil and other contaminants expelled from the PCV Valve before entering the combustion chamber which can cause knock or pre-ignition.
Cheaper oil catch cans are empty inside without any type of baffling or filters, but TF oil catch cans are baffled and contain steel wool to reduce the amount of contaminants in the engine.
Also, properly designed oil catch cans reduce carbon build-up on the valves, which can ultimately hinder engine performance.

Our oil catch can is specifically designed to fit directly under the wiper motor in the engine bay for LHD S13/S14.
This location is on the oil filter side of the KA/SR. is out of the way and is aesthetically pleasing.
It comes with 2 -10AN fittings with an easy to see fluid level tube and also an easy-drain plug that you can easily drain without removing the catch can from the engine bay.
Our catch cans have a 1.35 quart of fluid capacity and each catch can is hand-made and checked for leaks prior to shipping.

 

 

*PLEASE NOTE THIS CATCH CAN WILL NOT CLEAR CRUISE CONTROL, A/C Lines