The TF Brake Cooling Kit is engineered specifically to cool the brakes under cotinuous heavy braking.
Stock brake setup is well suited for the weight of the car and for daily driving, however in road race or autocross enviornments the brakes lack sufficient cooling and will over heat.
Over heating brakes will lead to reduced stopping power and inconsistent brake pedal pressure. Cooling the brakes will reduce brake fade and prolong the life of your pads.
TF Brake Cooling kit comes with a rotor backing plate which is designed to a very specific tolerance to force cool air through the rotor vents. The backing plates are made out of durable 6061-T6 aluminum, which is lightweight and will not corrode.
Our kit also includes custom bumper ducts which captures and directs air through the high temperature silicone hose to the brake rotors. The NACA ducts easily zipties behind the front grill to capture the most direct air flow.
You can see from the pictures how inconspicuous the bumper ducts are behind the grill. You can barely notice them.
*Note: Installation of our kit does require trimming of the inner fender lining*
*Installation on forced induction applications will require different hose routing due to intercooler piping/washer fluid resovoir clearance (Excluding GReddy kits) *
* 2 x Bumper Ducts
* 1 Right Double-ply high temperature non-kinking silicone hose
* 1 Left Double-ply high temperature non-kinking silicone hose
* 2 x Brake rotor backing plates (replaces OEM dust shields)
* Installation hardware included
Check out what ATL BRZ (HPDE Instructor) had to say about the brake cooling kit in action:
FT-86 Forum Review