Description
Genuine OEM Honda Flywheel bolts.
We highly recommend using OEM bolts for our K-swap twin disc clutch. ARP bolts - the head is too large in diameter.
Will need 8 for each clutch.
*Sold individually
Genuine OEM Honda Flywheel bolts.
We highly recommend using OEM bolts for our K-swap twin disc clutch. ARP bolts - the head is too large in diameter.
Will need 8 for each clutch.
*Sold individually
Quick view
Honda
Before dropping in your K24 engine, we highly recommend installing a 50 degree VTC Intake cam gear.The 50 degree VTC cam gear will provide the mid-range punch over the stock 25 degree gear that comes...
Quick view
Clutch Masters
ClutchMasters FX400 clutch and flywheel for K-series to S2000 trans kit.This is billet steel flywheel with the FX400 series pressure plate with full face disk. Recommended up to 400whp.
Quick view
Honda
Genuine OEM Honda K20/K24 USDM Water pump passage housing.If you purchased a JDM K24A2, you may have noticed that the alternator is attached differently then the USDM K-series engines. You may also...
Quick view
Honda
Another one of those small seals that should be changed while the front cover is off.
Quick view
Honda
These OEM flywheel bolts are used for the billet 5spd & 6spd flywheels only.You will need 8 for one flywheel.