Categories

Radium Engineering Crankcase VTA Catch Can Kit - 08-15 Mitsubishi EVO X

Radium Engineering Crankcase VTA Catch Can Kit - 08-15 Mitsubishi EVO X

$265.95
(No reviews yet) Write a Review
SKU:
20-0181
Shipping:
Calculated at Checkout

Description

Radium Engineering Crankcase VTA Catch Can Kit - 08-15 Mitsubishi EVO X

The Crankcase Catch Can Kits install immediately behind the LH headlight and plumbs in-line with the crankcase vent hose. This is the hose that connects from the port on the valve cover to the turbo air intake pipe. On 2008-2009 EVO X models which use the "metal" valve cover, the hose is 3/8" (10mm) and requires P/N 20-0106-08. On 2010+ EVO X models which use the "plastic" valve cover, the hose is 1/2" (13mm) and requires P/N 20-0106-10. During low engine loads, this hose experiences atmospheric pressure, but when the engine is at high load (WOT), this hose will experience vacuum and would normally be drawing unwanted crankcase vapors, unspent fuel, and oil sludge into the air filter intake pipe, turbocharger compressor, etc. For instance. if you are finding oil accumulation stuck in the intercooler, this catch can is a necessity. Oil coating the inside of the intercooler will lower the thermal efficiency of the intercooler.

Crankcase VTA Catch Can Kit:
-Billet oil catch can with integrated condenser and dipstick
-Laser cut powder coated LH mounting bracket
-Enough -10AN (5/8") black PCV hose for all applications 
-Radium 14-0136 -10AN Hose End, 2pc 90deg for push-lok hose
-Radium 14-0213 -10AN Hose End, 90deg push-lok hose end
-Radium 20-0050 barb fitting with air filter breather
-10AN male aluminum weld-on bung
-Vacuum caps for 1/2" and 3/8" barbs
-Stainless steel mounting hardware