HKS RB26 Crank Angle Sensor Conversion Kit ( Solid Camshaft )

HKS RB26 Crank Angle Sensor Conversion Kit ( Solid Camshaft )

(No reviews yet) Write a Review
Calculated at Checkout


This is a field proven kit used in HKS complete engine (RB28

The stock crank angle signal is calculated by the cam angle
sensor, and the rotation signal is subject to fluctuation due to

timing belt wobble and other factors. With this kit, the crank

angle sensor and cam angle sensor can be set to accurately

read the rotation signal, allowing the ignition setting to be

precisely adjusted at high RPM.

By resetting the fuel and ignition timing to match the improved
sensor accuracy, a 5
-7% increase in power output is expected.
The price of the stock Cam Angle Sensor has skyrocketed and
replacing it with this kit is a more advantageous deal, as it

provides better performance and refreshing.

As ignition coils get worn out, ignition noise could be picked up
by the ECU, causing it to misrecognize the rotation signal.

Simultaneous replacement with HKS SUPER FIRE RACING COIL

PRO (43005
-AN001, 43005-AN002, 43005-AN003) is

Specially designed harnesses with noise suppression transmit
more accurate signals by simply replacing deteriorated


Accurate crank angle readings with 36-2T crank trigger.



*This Kits required to managed by aftermarket ECU. (Recommended settings for managed with F-CON are listed in the instruction manual.)
-AN001(for Solid Cam) and 45999-AN002(for V CAM) have different component parts.
For vehicles equipped with solid cam, a special cam angle sensor is included. For vehicles equipped with V CAM, cam angle sig
nals are read
by the V CAM system, so the cam angle sensor is not included, but a special cam angle sensor cover is included in the package