The GKTECH roll center correction kit is CNC machined from 7075-T6 aluminium and provides 40mm of roll center correction, 40mm of bump steer correction and also re-positions the steering arm to increase steering lock. The roll center correction kit bolts up to the bottom of your standard knuckle and can be removed with no ramifications at all. With the use of our offset steering rack spacers you will see 60 degrees of lock. By far the cheapest way of getting both roll center correction and lock.
NOTE: These will increase camber as it pushes the bottom of the wheel out 25mm so best to only use with adjustable camber tops.
- Nissan 180sx
- Nissan S13 Silvia