• Utilizes Wilwood 4 Piston Calipers and Wilwood BP-10 Brake Pads
Everything you need to install a secondary pair of calipers to the rear of your E36 or E46.
The OE parking brake components will need to be removed behind the rotor. The DCB bolts directly to the RTA behind the rotor using 3 factory threaded holes per side. This kit requires no drilling, cutting, or grinding to any OE components. The upper control arm attachment bolt to the RTA will be close to the Wilwood caliper, but during testing we have seen that it will clear.
MAKE SURE to properly torque the three Bracket to Trailing Arm Bolts to spec listed below. These 3 bolts will have almost the entire weight of the car on them and must create proper "spring tension" to eliminate break risk. If you don't you run the risk of snapping the bolts and the caliper bouncing around your wheels until you come to a stop.
Chase Bays Ultra Compact Hydro Handbrake (Forward Mount)
Chase Bays Ultra Compact Hydro Handbrake (Reverse Mount)
We offer a Handbrake Brake Line Kit, too:
If you purchase the product on this page, the Handbrake, and the Handbrake Brake Line Kit...its EVERYTHING you need to install a Handbrake into your E36 or E46 3 series.