AEM Electronics 6/8h Plug in Play Jumper Harness - 03-05 Mitsubishi Evolution 8
Once you have determined which AEM Infinity ECU will best support your Mitsubishi Evo VIII or IX M/T engine, you will need to purchase a Plug & Play adapter harness. AEM’s Plug & Play harness for Mitsubishi Evo engines includes a Wideband O2 connector, AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, oil temperature and ethanol content sensor. The expansion port also includes a sensor ground, 5v reference, 12v power from relay and high side output for activating a relay or solenoid, a low side output for boost control and analog inputs for mode switch and no-lift shift. The Infinity EMS delivers high-end engine control for the racing masses at a fraction of the cost. The Infinity-6 (Part # 30-7106) and -8h (Part # 30-7108) for Mitsubishi Evo race engines is even more affordable than its larger -8 and -10 version because it is designed for smaller racing engines using low impedance injectors up to 6 cylinders or race engines driving up to 8 high impedance injectors. It features a smaller footprint than the Infinity-8/-10 (5.855” x 5.55” x 1.8”) and a single, weatherproof 80-pin connector.